Watching A Dvd Image; Connecting A Dvd Player; Displaying A Dvd Image - Sharp PZ-MR2X Operation Manual

Using external equipment

Watching a DVD image

Connecting a DVD player

You can use the INPUT 1 terminal when connecting a DVD player and other audiovisual equipment.
AVC System (rear view)
ANT
OUT ANT/CABLE 75Ω
E-47
COMPONENT
Y P P
B R
INPUT 3
MONITOR OUTPUT S-VIDEO VIDEO R-AUDIO-L S-VIDEO
S-video cable
(commercially available)
MENU
Option
Input Select
Input1
AUTO
AV-Y/C
COMPONENT
INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
INPUT4
PC
Component video cable
(commercially available)
COMPONENT
Y P P
B R
INPUT 1
RS-232C
DISPLAY OUTPUT-2
INPUT 2
VIDEO R-AUDIO-L
AV cable
(commercially available)

Displaying a DVD image

When connecting to the INPUT 1 terminal, select
"INPUT1" and set the correct input signal type on "Input
Select" in the menu. (See page 54.)
[AUTO]
The setting is stored and can be selected on the
"INPUT SOURCE" menu.
To watch a DVD image, select "INPUT1" from "INPUT
SOURCE" menu using b on the remote control unit
or INPUT on the Plasma Display. (See page 54.)
A
• Each time b is pressed, the input source toggles.
• If the DVD image does not come in clearly, you may need
to change the input signal type setting on the "Input Select"
menu.
• Refer to your DVD player operation manual for the signal
type.
When using component
video cable, select
DISPLAY OUTPUT-1
"COMPONENT" for
"Input Select" in the
menu.
AC INPUT
110V - 24OV
DVD player