Lenovo 10B0 Maintenance Manual page 243

10. Carefully pivot the failing system board upward to remove it out of the chassis.
Figure 207. Removing the system board
11. Remove the microprocessor from the failing system board and install it on the new system board. See
"Replacing the microprocessor" on page 233.
12. Install the new system board into the chassis by aligning the five screw holes in the new system board
with the corresponding mounting studs on the chassis. Then, install the five screws from screw
screw 1 in sequence to secure the system board.
Figure 208. Installing the five screws to secure the system board
13. Reinstall the thermal module. See "Replacing the thermal module" on page 231.
.
Chapter 11 Replacing FRUs (machine types: 10AX and 10AY)
5 to
237