Installing Or Removing The Vesa Mount Bracket - Lenovo 10B0 Maintenance Manual

2. Lift the computer to remove it from the vertical stand.
Figure 143. Removing the computer from the vertical stand

Installing or removing the VESA mount bracket

Attention:
Do not open your computer or attempt any repair before reading and understanding the "Important safety information"
on page 1.
This section provides instructions on how to install or remove the VESA mount bracket.
Note: The VESA mount bracket is only available on some models.
To install the VESA mount bracket, do the following:
1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect
all power cords from electrical outlets and disconnect all cables that are connected to the computer.
.
Chapter 11 Replacing FRUs (machine types: 10AX and 10AY)
193