Lenovo 10B0 Maintenance Manual page 127

Removing the Wi-Fi adapter card
To remove a Wi-Fi adapter card, do the following:
1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect
all power cords from electrical outlets and disconnect all cables that are connected to the computer.
2. Remove the computer cover. See "Removing the computer cover" on page 90.
3. If your computer comes with a Wi-Fi card module that supports the Bluetooth function, disconnect
the Bluetooth cable from the Wi-Fi adapter card.
Figure 51. Disconnecting the Bluetooth cable
Note: The Bluetooth cable connects the Bluetooth connector on the Wi-Fi adapter card to the front USB
connector on the system board to support the Bluetooth function.
4. At the rear of the computer, remove the screw that secures the PCI card latch.
.
Chapter 9 Replacing FRUs (machine types: 10B0, 10B1, 10B2, and 10B3)
121