2. Remove the power cord from the ac power adapter cable loop at the rear of the computer and then
disconnect the ac power adapter cable from the computer.
Figure 141. Disconnecting the ac power adapter
Installing or removing the vertical stand
Attention:
Do not open your computer or attempt any repair before reading and understanding the "Important safety information"
on page 1.
This section provides instructions on how to install or remove the vertical stand.
Note: The vertical stand and Video Electronics Standards Association (VESA) mount bracket are optional
parts. If your computer comes with the VESA mount bracket installed, ensure that you remove the VESA
mount bracket before you install the vertical stand. To remove the VESA mount bracket, see "Installing or
removing the VESA mount bracket" on page 193.
To install the vertical stand, do the following:
.
Chapter 11
Replacing FRUs (machine types: 10AX and 10AY)
191