Lenovo 10B0 Maintenance Manual page 169

9. Install the new power supply assembly into the chassis so that the screw holes in the new power supply
assembly are aligned with the corresponding holes in the rear of the chassis. Then, install the three
screws to secure the new power supply assembly.
Note: Use only screws provided by Lenovo.
Figure 107. Installing the power supply assembly
10. Connect the new power supply assembly cables to all drives and the system board. See "Locating
parts on the system board" on page 80.
163
.
Chapter 10 Replacing FRUs (machine types: 10B4, 10B5, 10B6, and 10B7)