To Display The Format Of The Set Operation; Parameters; To Set Up The Hdlm Operating Environment - Hitachi XP P9500 User Manual

{-lb {on [-lbtype {rr|exrr|lio|exlio|lbk|exlbk}]|off}
|-ellv error-log-collection-level
|-elfs error-log-file-size
|-elfn number-of-error-log-files
|-systflv trace-level
|-systfs trace-file-size
|-systfn number-of-trace-files
|-pchk {on [-intvl checking-interval]|off}
|-afb {on [-intvl checking-interval]|off}
|-iem { on [-intvl error-monitoring-interval]
[-iemnum number-of-times-error-is-to-occur] | off }
|-lic
|-audlog {on [-audlv audit-log-data-collection-level] [-category
[[ss] [a] [ca]|all]]|off}
|-audfac facility-value}
[-s]

To display the format of the set operation

/opt/DynamicLinkManager/bin/dlnkmgr set -help

Parameters

To set up the HDLM operating environment

Table 6-2 Default and Recommended Values on page 6-17
and recommended values for each setting. If you change the set value by
using the set operation, the new value takes effect immediately.
Item name
Load balancing
Error log collection
level
Error log file size
Number of error
log files
Trace level
Trace file size
Table 6-2 Default and Recommended Values
Default value
on
The Extended Least I/Os
algorithm is used.
3: Collects error information at
the Information level or higher.
9900 (kilobytes)
2
0: Do not output any trace.
1000 (kilobytes)
Command Reference
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
shows the default
Recommended value
on
The recommended algorithm
depends on the operating
environment.
3: Collects error information at
the Information level or higher.
9900 (kilobytes)
2
0: Do not output any trace.
1000 (kilobytes)
6-17