# /opt/DynamicLinkManager/bin/dlnkmgr view -path
Viewing and Setting Up the Operating Environment
This section explains how to display and set up the HDLM operating
environment.
Viewing the Operating Environment
To display the operating environment, execute the dlnkmgr command's view
operation with the -sys and -sfunc parameters specified.
The following shows an example of executing the command:
# /opt/DynamicLinkManager/bin/dlnkmgr view -sys -sfunc
HDLM Version
Service Pack Version
Load Balance
Support Cluster
Elog Level
Elog File Size(KB)
Number Of Elog Files
Trace Level
Trace File Size(KB)
Number Of Trace Files
Path Health Checking
Auto Failback
Intermittent Error Monitor
KAPL01001-I The HDLM command completed normally. Operation name =
view, completion time = yyyy/mm/dd hh:mm:ss
#
To display the operating environment of the audit log, execute the HDLM
command's view operation with the -sys and -audlog parameters specified.
The following example shows how to execute the command:
# /opt/DynamicLinkManager/bin/dlnkmgr view -sys -audlog
Audit Log
Audit Log Category
Audit Log Facility
KAPL01001-I The HDLM command completed normally. Operation name =
view, completion time = yyyy/mm/dd hh:mm:ss
#
For details on the displayed items and their descriptions, see
Information) on page
Setting Up the Operating Environment
To set up the HDLM operating environment, execute the dlnkmgr command's
set operation. This operation allows you to set up the following functions:
•
Load balancing
6-30.
HDLM Operation
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
: x.x.x-xx
:
: on(extended lio)
:
: 3
: 9900
: 2
: 0
: 1000
: 4
: on(30)
: on(1)
: off
: off
: -
: -
view (Displays
4-11