Tasks That Can Be Performed In Single-User Mode - Hitachi XP P9500 User Manual

wait at least 10 seconds and then re-execute the command. If still
unsuccessful, take the action indicated in the displayed message.
3 Execute the following command to set the HDLM logical device file name
.
in the HDLM filter driver:
# /opt/DynamicLinkManager/bin/dlmsetdevname
4 Execute the following command to start the HDLM manager:
.
# /etc/init.d/DLMManager start

Tasks that Can Be Performed in Single-User Mode

By executing the procedure described in
Started in Single-User Mode on page
in single-user mode while applications are inactive.
For Solaris
You can perform the following tasks on the server on which HDLM is
installed, in the same manner as on a server without HDLM installed:
¢
¢
¢
For HDLM
¢
¢
¢
¢
¢
¢
¢
¢
¢
#
For applications
¢
¢
¢
Apply patches
Add or delete packages
Change basic settings in Solaris, etc.
Installing HDLM
Configuring a boot disk environment
Setting up HDLM functions
Setting up an integrated trace
Creating a file system
Executing an HDLM command
Using an HDLM device
Changing the configuration of the HDLM operating environment
Applying an HDLM service pack
In single-user mode, HDLM command activity is not logged to
integrated trace files.
Install an application
Upgrade an application
Set or change the configuration
HDLM Operation
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
Initializing HDLM When the Host Is
4-4, you can perform the following tasks
#
4-5