Table of Contents
Advertisement
apply Subcommand
Syntax
apply
Description
The apply subcommand saves monitoring data specified by the group
subcommand into files.
The login subcommand must execute before the apply subcommand executes.
The apply subcommand does nothing if the group subcommand executes.
The settings made by the group subcommand will be reset when the apply
subcommand finishes.
set subcommand
Syntax
set [switch={m|off}]
Description
The set subcommand starts or ends monitoring the storage system (i.e.,
starts or ends collecting performance statistics). The set subcommand also
specifies the gathering interval (interval of collecting statistics) in short range
monitoring.
If you want to use the set subcommand, you must use the login subcommand
(see login Subcommand) to log on to the SVP. Ensure that the set
subcommand executes immediately before the Export Tool finishes.
Executing the set subcommand generates an error in the following conditions:
•
Some other user is being logged onto the SVP in Modify mode.
•
Maintenance operations are being performed at the SVP.
If an error occurs, do the following:
•
Ensure that all the users who are logged onto the SVP are not in Modify
mode. If any user is logged on in Modify mode, ask the user to switch to
View mode.
•
Wait until maintenance operations finish at the SVP, so that the set
subcommand can execute.
7-64
Hitachi Universal Storage Platform V/VM Hitachi Performance Manager User's Guide
Using the Export Tool
Advertisement
Table of Contents
