Hitachi XP P9500 User Manual page 142

Figure 3-8 Flow of setting up the boot disk environment when using an
1 Allocate the LUs to be used by the boot disk in the post-migration
.
environment.
2 Get Solaris to recognize the LUs to be used by the post-migration boot
.
disk.
3 Set the LU slices to be used by the post-migration boot disk.
.
4 Execute the dlmsetconf utility as follows to create the HDLM driver
.
configuration definition file (/kernel/drv/dlmfdrv.conf) and the HDLM
driver unconfiguration definition file (/opt/DynamicLinkManager/config/
dlmfdrv.unconf):
# /opt/DynamicLinkManager/bin/dlmsetconf
3-78
existing HDLM environment as the pre-migration environment
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Solaris(R))