Hitachi XP P9500 User Manual page 331

be changed to the Online status. Is this OK? [y/n]:y
KAPL01061-I 3 path(s) were successfully placed Online; 0
path(s) were not. Operation name = online
#
-hbaid HBA-port-ID
Use this parameter to place online, at one time, all paths that pass
through a specific HBA port. The command will place online all paths
connected to the HBA port that has the specified HBA-port-ID. To display
the HBA port IDs, execute the following view operation:
# /opt/DynamicLinkManager/bin/dlnkmgr view -hba
For details about how to execute the view operation to display the HBA
port IDs, see
To display HBA port information on page 6-58
in Parameters on page
Example
The following example shows how to place online all paths connected
to the HBA port whose HBA-port-ID is 00001.
# /opt/DynamicLinkManager/bin/dlnkmgr online -hbaid 00001
KAPL01104-I All the paths which pass the specified HBA port
will be changed to the Online status. Is this OK? [y/n]:y
KAPL01061-I 15 path(s) were successfully placed Online; 0
path(s) were not. Operation name = online
#
-cha -pathid AutoPATH_ID
Use this parameter to place online, at one time, all the paths that pass
through a specific CHA port. The command will place online all the paths
that pass through the CHA port to which the path with the specified
AutoPATH_ID is connected.
Specify the current AutoPATH_ID of the target path, which is displayed by
using the view operation. For details on the view operation, see
(Displays Information) on page
(000001 and 1 indicate the same AutoPATH_ID). Therefore, when the
target AutoPATH_ID is 000000, enter 000000 or 0 for the parameter
value.
AutoPATH_IDs are re-assigned every time the host is restarted. When you
want to add a new LU without restarting the host, AutoPATH_IDs are re-
assigned to each path of the LU when you execute the dlmcfgmgr utility
for managing the HDLM configuration. Always make sure that you execute
the view operation to find the current AutoPATH_ID of the target path,
before executing the online operation.
Example
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
6-32.
6-30. Leading zeros can be omitted
Command Reference
view
6-13