Sharp AR-PB2 Operation Manual page 50

PRINTER TROUBLESHOOTING
Problem: Printer is on, data is received but is not printed. (Data indicator blinks.)
Check: Has an error occurred?
Solution: Check to see if an error message is displayed on the touch panel of the printer.
Check: Is the specified size paper loaded in the printer?
Solution: Load paper, select another paper size or cancel printing.
Check: Is printer memory set correctly? (Windows 95/98)
Solution: Set the printer memory which is actually installed in the configuration setting of the
printer driver. (page 25)
Check: Sufficient memory installed?
Solution: If the PostScript error page indicates user memory error, the memory is not sufficient.
Add memory.
Problem: Printer cannot be selected from computer.
Check: Is the printer driver installed correctly?
Solution: Install the printer driver correctly. (page 5)
Problem: Cannot print test page from operation panel.
Check: Paper tray empty?
Solution: Fill the paper tray.
Check: Paper jam?
Solution: Clear the jam.
Check: Is there sufficient toner in the printer?
Solution: Add toner as specified in the copier manual.
Problem: Printed documents are too light or too dark.
Check: Is the exposure control set properly?
Solution: Use key operator program "Printer Exposure Level" to adjust the exposure.
Problem: Print quality is unsatisfactory.
Check: Was the wrong printer driver installed?
Solution: Uninstall the wrong printer driver, and install Sharp AR-PB2 printer driver. Refer to
Chapter 2.
Problem: Incorrect orientation
Check: Is the orientation setting in the printer driver correct?
Solution: Correct the orientation in the printer driver. (page 18)
44