Example Configuration Task; Printer Configuration Menus - Sharp AR-PB2 Operation Manual

Digital copier printer expansion kit

Hide thumbs Also See for AR-PB2:

Table of Contents

USING THE OPERATION PANEL

Example Configuration Task

The following procedure for changing the page orientation from 'Portrait' to 'Landscape' provides an

example of operating the operation panel.

Use steps 1 and 2 above to access the printer configuration menu.

Steps 3 through 6 demonstrate how to change the setting from 'Portrait' to 'Landscape'.

3. Press the "PRINTER SETTINGS" key on the main menu screen.

4. Press the "ORIENTATION" key.

5. Press the "LANDSCAPE" key to highlight it and then press the "OK" key.

6. Press the "OK" key to return to the main menu. Press the "ONLINE/OFFLINE" key to return to

the online mode.

A flow chart of the printer configuration menu is shown in Figure 4-2. The menu structure changes

depending on whether a network interface card is present in the copier/printer or not. The menus

inside the gray area are for a copier/printer with a network interface card (Print Server Card)

installed.

NOTE

Depending on the particular printer, some functions of the printer configuration menu cannot be set, for example,

smoothing and toner save mode.

Table of Contents