Printer Exposure Level - Sharp AR-PB2 Operation Manual

USING THE OPERATION PANEL
PROGRAM NAME

Printer Exposure Level

Memory Reserved for Printer
Output Method When Memory Is Full
Enable Bypass-Tray Size Detection
Prohibit Notice Page Printing
Prohibit Rotated Output
Prohibit Bypass-Tray Selection
Prohibit Auto Tray Switching
Prohibit Test Page Printing
Prohibit Changes to Printer Settings
Prohibit Changes to Interface Settings
Prohibit Changes to Network Settings
Printer Exposure Level
This program is used to adjust the lightness or darkness of documents in the printer mode. The
factory default is level '3'.
When the "PRINTER EXPOSURE LEVEL" key is pressed, the following display will appear.
KEY OPERATOR PROGRAMS
PRINTER EXPOSURE LEVEL
Table 4-1. Key Operator Program Functions
Lightens or darkens printouts.
Specifies percentage of document memory
allocated to storage of printer jobs.
Specifies whether one set or multiple sets
will be printed when the printer memory
becomes full.
Enables or disables paper size detection
for the bypass tray.
Specifies whether a notice page will be
printed when the printer memory becomes
full and divided printing is performed.
Enables/disables rotation of print image for
printing onto A4R or 8-1/2" x 11"R paper.
Enables/disables bypass tray selection in
the 'Auto Tray Switching' mode.
Enables/disables automatic switching
between paper trays during printing when
paper runs out.
Enables/disables test page printing from
the printer configuration menu.
Prohibits modification of basic printer
settings in the printer configuration menu.
Prohibits modification of interface settings
in the printer configuration menu.
Prohibits modification of network settings
in the printer configuration menu.
OK
FUNCTION
1. Set the desired density level using the
" " and "
2. Press the "OK" key.
36
PAGE NO.
36
37
37
38
38
39
39
39
39
40
40
40
" keys.