Inserting And Ejecting A Cd-Rom - Fujitsu PRIMERGY RX200 S2 User Manual

Chapter 1 Overview
■ Ejecting the Floppy Disk
1
Make sure that the floppy disk access LED is off. Press the floppy disk eject
button.
The floppy disk is ejected.
Floppy disk
access LED

1.4.5 Inserting and Ejecting a CD-ROM

This section explains how to insert and eject a CD-ROM.
■ Cautions for Handling CD-ROM Drive
• Use the drive in a dry place with low airborne dust levels. Entry of water, a paper clip, or other liquids
or metal objects can cause electric shock or failures.
• Do not use the drive in a place exposed to shocks or vibration.
• Do not insert any object other than the specified CD-ROMs.
• Do not pull or push the CD-ROM tray forcibly.
• Do not disassemble the CD-ROM drive.
• Clean the CD-ROM tray before use. Use a dry, soft cloth for cleaning.
• When the CD-ROM drive is not used for a prolonged period, eject the CD-ROM to prevent accidents.
To avoid dust or particles, keep the CD-ROM tray closed (in a loaded position).
• This server supports CD-ROMs with the following logo. Do not use CD-ROMs without the logo.
Doing so may cause failures.
34
Floppy disk
Off
eject button
• Do not eject the floppy disk while the floppy disk access LED is on. The data
stored on the floppy disk may be damaged.