Bios Setup Utility; Starting And Exiting The Bios Setup Utility - Fujitsu PRIMERGY RX200 S2 User Manual

Chapter 8 Hardware Configuration/Utilities

8.2 BIOS Setup Utility

This section explains settings for the BIOS Setup Utility and items regarding each setting.

8.2.1 Starting and Exiting the BIOS Setup Utility

The following explains how to start and exit the BIOS Setup Utility.
■ How to Start the BIOS Setup Utility
1
Turn the server on.
"1.4.2 Turning On the Server" (pg.30)
2
After memory counting in POST, press the [F2] key when the message "Press
<F2> to enter SETUP <F12> to boot menu" is displayed on the screen.
The [Main] menu appears.
Main
System Time
System Date:
Diskette A:
Primary Master
Boot Options
Base Memory
Extended Memory
Info
F1
Esc Exit
208
PhoenixBIOS Setup Utility
Advanced Security
[HH:MM:SS]
[MM:DD:YYYY]
[1.44/1.25 MB 3
[CD-ROM]
nnn KB
nnnnn KB
-/+
Select Item
Select Menu Enter
While the message "Press <F2> to enter SETUP <F12> to boot menu" is displayed after mem-
ory counting in POST, pressing the [F12] key causes the [Boot Menu] window to appear.
The [Boot Menu] window allows you to select the disk to boot next.
Boot Menu
1. CD-ROM Drive
2. +Removable Devices
3. +Hard Drive
<Enter Setup>
Server Exit
Item Specific Help
"]
1/2
Change Values
F9 Setup Defaults
Save and Exit
Select Sub-Menu F10