Ethernet On Board Submenu; Pci Irq Configuration Submenu; Pci Slots Configuration Submenu - Fujitsu PRIMERGY RX200 S2 User Manual

Chapter 8 Hardware Configuration/Utilities

■ Ethernet on Board Submenu

Configures the LAN controller on the baseboard.
Ethernet 1 and Ethernet 2 have the same setting values.
Item
Ethernet on Board
Option ROM Scan
Latency Timer
■ PCI Device, Embedded LSI SCSI 1020 Submenu
Configures the SCSI controller on the baseboard.
Item
Device
Option ROM Scan
Latency Timer

■ PCI IRQ Configuration Submenu

Sets PCI IRQ assignment for the PCI slots.
Item
PCI IRQ Line 0/VGA

■ PCI SLOTS Configuration Submenu

Configures the PCI slots. PCI Slot 1 and PCI Slot 2 have the same setting values.
Item
Option ROM Scan
Latency Timer
218
table: Items on the Ethernet on Board Submenu
Setting
Enabled (Fixed parameter)
• Disabled (at the time of
purchase)
• Enabled
0040h (Fixed parameter)
table: Items on the PCI Device, Embedded LSI SCSI 1020 Submenu
Setting
Enabled (Fixed parameter)
• Disabled
• Enabled (at the time of
purchase)
0040h (Fixed parameter)
table: Items on the PCI IRQ Configuration Submenu
Setting
Auto (Fixed parameter)
table: Items on the PCI SLOTS Configuration Submenu
Setting
• Disabled (at the time of
purchase)
• Enabled
0040h (Fixed parameter)
Description
Sets whether to enable or disable the LAN
controller on the baseboard.
Sets whether or not to initialize the extended ROM.
Sets the minimum guarantee time in the PCI bus
clock unit for the PCI bus master method.
Description
Sets whether to enable or disable the SCSI
controller on the baseboard.
Sets whether or not to initialize the extended ROM.
Sets the minimum guarantee time in the PCI bus
clock unit for the PCI bus master method.
Description
Sets a PCI IRQ for the VGA controller on the
baseboard.
Description
Sets whether or not to initialize the extended
ROM. For notes on settings, refer to "7.5.2
Installable Expansion Cards and Notes"
( pg.180).
Sets the minimum guarantee time in the PCI bus
clock unit for the PCI bus master method.