Boot Options Submenu - Fujitsu PRIMERGY RX200 S2 User Manual

8.2.4 Boot Options Submenu

Appears when [Boot Options] is selected from the [Main] menu.
Sets system startup options.
Main
POST Errors:
Keyboard Check:
SM Error Halt:
Quick Boot:
Quiet Boot:
Memory Testing:
Boot Menu:
Boot Sequence
MultiBoot for HDs:
F1 Info Select Item
Esc Exit Select Menu
Item
POST Errors
Keyboard Check
SM Error Halt
Quick Boot
Quiet Boot
Memory Testing
Boot Menu
Boot Sequence
MultiBoot for HDs
PhoenixBIOS Setup Utility
Boot Options
[Enabled]
[Enabled]
[Disabled]
[Disabled]
[Disabled]
[Enabled]
[Enabled]
[Enabled]
-/+ Change Values
Enter Select
table: Items on the Boot Options Submenu
Setting
Enabled (Fixed parameter)
• Disabled
• Enabled (at the time of
purchase)
Disabled (Fixed parameter)
Disabled (Fixed parameter)
Disabled (Fixed parameter)
Enabled (Fixed parameter)
Enabled (Fixed parameter)
[Enter]
Enabled (Fixed parameter)
PRIMERGY RX200 S2 User's Guide
Item Specific Help
Setup Defaults
F9
Save and Exit
Sub-Menu F10
Description
Sets whether or not to stop the boot process and
shut down the system, in case a POST (Power On
Self Test) error is detected.
Sets whether or not to check for a keyboard during
POST.
Sets the procedure in case an error occurs regarding
the fan or temperature sensor.
Sets whether or not to run POST in short mode.
Sets whether or not to display the logo screen
instead of POST information.
Sets whether or not to check the memory during
POST.
Sets whether to enable or disable the boot menu.
Sets the order of selected drives to boot the OS.
■
" Boot Sequence Submenu" (pg.214)
Sets whether or not it is possible to specify the
order of hard disks to boot the OS when multiple
hard disk units are installed.
8
213