Global Properties Menu - Fujitsu PRIMERGY RX200 S2 User Manual

8.3.4 Global Properties Menu

Configures SCSI BOIS operation during POST.
Select this menu from the header of the [Main] menu.
LSI Logic MPT SCSI Setup Utility
Global Properties
Pause When Boot Alert Displayed
Boot Information Display Mode
Negotiate with devices
Video Mode
Support Interrupt
<Restore Defaults>
Esc=Abort/Exit
Item
Pause When Boot Alert
Displayed
Boot Information Display
Mode
Negotiate with devices
Video Mode
Support Interrupt
Version MPTBIOS-IMx.xx.xx
[Yes]
[Verbose]
[Supported]
[Color]
[Hook interrupt, the Default]
ArrowKeys=Select Item
Home/End=Select Item
table: Items on the Global Properties Menu
Setting
Yes (Fixed parameter)
Verbose (Fixed parameter)
Supported (Fixed
parameter)
• Color (at the time of
purchase)
• Monochrome
Hook Interrupt, the Default
(Fixed parameter)
PRIMERGY RX200 S2 User's Guide
-/+=Change[Item]
Enter=Execute<Item>
Description
When a hard disk failure occurs during POST and
the logical drive becomes critical, the startup will
be paused. Use this configuration by setting Yes.
Note:
When this configuration is set No, the
following failure may occur. While using the
server without replacing a hard disk and
restarting the system after a hard disk failed,
if the second hard disk failed, the first failed
hard disk may startup depending on the fail
mode. This may result in the system starting
up with old data and losing the new data.
Sets the amount of host adapter or SCSI device
information to be displayed in the POST window.
Sets the SCSI negotiation method.
Sets whether or not to display information on the
SCSI Setup Utility in color or monochrome during
POST.
Displays the IRQ mode.
8
239