Fujitsu PRIMERGY RX200 S2 User Manual page 118

Hide thumbs Also See for PRIMERGY RX200 S2:
Table of Contents

Advertisement

Chapter 4 Manual OS Installation
2
Insert the Windows 2000 Server CD-ROM.
Turn on the server and insert the Windows 2000 Server CD-ROM immediately into the CD-ROM
drive. Check there are no floppy disks in the floppy disk drive. When the active area is specified
on the hard disk, the following message appears.
Press any key to boot from CD. . . .
Pressing any key while this message is displayed boots the system from the CD-ROM.
3
The [Windows 2000 Server Setup] window appears.
Immediately, the following message appears at the bottom of the window. Press the [F6] key.
Press F6 if you need to install a third party SCSI or RAID
driver ...
4
Install the drivers manually.
1. When the following message appears, press the [S] key.
To specify additional SCSI adapters, CD-ROM drives,
or special disk controllers for use with Windows 2000,
including those for which you have a device
support disk from a mass storage device
manufacturer, press S.
2. When the "Please insert the disk labeled Manufacturer-supplied hardware support
disk into Drive A:" message appears, insert the driver disk created from the
ServerStart CD-ROM and press the [Enter] key.
The following message appears.
You have chosen to configure a SCSI Adapter for use
with Windows 2000, using a device support disk
provided by an adapter manufacturer.
Select the SCSI Adapter you want from the following
list, or press ESC to return to the previous screen.
3. Select the following and press the [Enter] key.
LSI Logic PCI SCSI/FC MPI Miniport Driver
4. Follow the window instructions to perform installation.
When a message prompting you to insert a floppy disk appears, insert the proper
driver disk and press the [Enter] key.
5
Follow the instructions from the setup program to continue the installation
procedures.
118
This message will be displayed for a short time after the setup window (blue screen) appears.
Press the [F6] key immediately after the window turns blue.
Repeat these procedures to install a driver for another card.

Advertisement

Table of Contents
loading

Table of Contents