Chapter 8 Hardware Configuration/Utilities
8.2.3 Primary Master Submenu
Appears when [Primary Master] is selected from the [Main] menu.
Sets the type and operating mode for the connected internal hard disk unit.
Main
Primary Master
Type:
Transfers mode:
LBA Translation:
PIO Mode:
32 Bit I/O:
Ultra DMA Mode:
F1
Info
Exit
Esc
Item
Type
Transfers Mode
LBA Translation
PIO Mode
32 Bit I/O
Ultra DMA Mode
212
PhoenixBIOS Setup Utility
[CD-ROM]
[Auto]
[Disabled]
[Disabled]
[FPIO 4 / DMA 2]
[Enabled]
[Mode 2]
-/+
Change Values
Select Item
Select Menu
Enter
Select
table: Items on the Primary Master Submenu
Setting
Auto (Fixed parameter)
Disabled (Fixed parameter)
Disabled (Fixed parameter)
FPIO 4/DMA 2 (Fixed
parameter)
Enabled (Fixed parameter)
Mode2 (Fixed parameter)
Item Specific Help
Setup Defaults
F9
Sub-Menu
F10
Save and Exit
Description
Sets the type of the IDE device.
When [Type] is set to [Auto], displays the number
of sectors detected and transferred at once by the
server.
Sets whether to enable or disable the LBA (Logical
Block Addressing: access based on logical serial
numbers).
Sets the PIO (Programmed I/O) data transfer mode.
Specifies the bus width for data transfer between
the CPU and the IDE controller.
Sets the DMA (Direct Memory Access) data
transfer mode.