Motorola G24 Guide Developer's Manual page 579

\G
\J
\K
\N
\S
ATS97
+CACM
+CALM
+CAMM
+CAOC
+CBAND
+CBAUD
+CBC
+CBM
+CBST
December 31, 2007
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command
This command sets the use of the
software control.
This command adjusts the
terminal auto rate.
This command is supported for
backward compatibility only, and
has no effect.
This command links the type.
This command displays the status
of selected commands and
S-registers.
This command indicates whether
an antenna is physically
connected to the G24 RF
connector.
This command resets the Advice
of Charge accumulated call meter
value in the SIM file, EFACM.
This command handles the
selection of the G24's alert sound
mode.
This command sets the Advice of
Charge accumulated call meter
maximum value in the SIM file,
EFACMmax.
This command enables the
subscriber to get information
about the cost of calls.
This command is supported for
backward compatibility only, and
has no effect.
This command sets the baud rate.
This command enables a user to
query the battery charger
connection.
This unsolicited message
forwards the SMS upon its
arrival.
This command selects the bearer
service and the connection
element to be used when data
calls are originated.
AT Commands Reference Manual
Appendix A: Reference Tables
Description
Page 3-280
Page 3-280
Page 3-422
Page 3-280
Page 3-280
Page 3-206
Page 3-57
Page 3-245
Page 3-58
Page 3-55
Page 3-280
Page 3-194
Page 3-193
Page 3-108
Page 3-33
Page
A-3