Clvl, Loudspeaker Volume - Motorola G24 Guide Developer's Manual

The following table shows the +CRSL parameters.
<Parameter>
<level>
Example
AT+CRSL?
+CRSL: 7
OK
AT+CRSL=?
+CRSL: (0-7)
OK
AT+CRSL=5
OK

+CLVL, Loudspeaker Volume

This command sets the volume of the internal loudspeaker (which also affects the key feedback
tone) of the G24.
Note:
The +CLVL command can be used even when the SIM is not inserted. This command has no
affect on digital audio mode.
Command Type
Set
Read
Test
December 31, 2007
Table 3-149: +CRSL Parameters
0-7 Ringer sound level (0 is lowest; 7 is default)
The +CLVL command does not control the alert speaker.
In this command, the new value remains after power cycle.
Syntax
+CLVL=<level>
+CLVL?
+CLVL=
AT Commands Reference Manual
Chapter 3: AT Commands Reference
Description
Response/Action
OK The Set command sets the internal
loudspeaker volume level.
+CME ERROR: <err>
+CLVL: <level> The Read command displays the
current internal loudspeaker volume
+CME ERROR: <err>
setting.
+CLVL: (list of The Test command displays the
possible loudspeaker volume settings.
supported <level>s)
+CME ERROR: <err>
Remarks
3-233