Motorola G24 Guide Developer's Manual page 401

The following table shows the +CIND parameters.
<Parameter>
<service>
<call>
<recsms>
<roam>
<signal>
<simav>
<smsfull>
Example
AT+CIND=?
+CIND:
("service",(0,1)),("call",(0,1)),("recmsg",(0,1)),("simav",(0,1)),("Roam",(0-2)),("signal",(0-5)),("smsfull",
(0,1))
OK
AT+CIND?
+CIND: 1,0,0,0,0,5,0
OK
ATD 035684469;
OK
CONNECT
AT+CIND?
+CIND: 1,1,0,0,0,5,0
OK
December 31, 2007
Table 3-208: +CIND Parameters
0 Service not available.
1 Service available.
0 No call in progress.
1 Call in progress.
0 No unread messages.
1 Unread messages exist.
0 ME is camped on a home network.
1 ME is roaming on home network.
2 ME is roaming on other network.
0 ME has no service.
1 ME has 1 bar of signal strength.
2 ME has 2 bars of signal strength.
3 ME has 3 bars of signal strength.
4 ME has 4 bars of signal strength.
5 ME has 5 bars of signal strength.
0 No SIM card available.
1 SIM card is inserted.
0 SMS storage is not full.
1 SMS storage is full.
AT Commands Reference Manual
Chapter 3: AT Commands Reference
Description
3-317