<Duration>
<Repeat>
Example
The example illustrates wakeup of two reminders.
+MALARM: 1,"07/02/15,13:30","Weekly Meeting",1,2
+MALARM: 1,"07/02/15,13:30","Weekly Meeting",1,2
+MALARM: 1,"07/02/15,13:30","Weekly Meeting",1,2
.........
.........
+MALARM: 1,"07/02/15,13:30","Weekly Meeting",1,2
AT+MALMH
OK
+MALARM: 2,"07/02/15,13:30","Go to sleep while Weekly Meeting",0,0
+MALMH, Terminate the Current Reminder
This command causes G24 to terminate the current reminder and the alert that accompanied by it.
If reminder does not exist, error code will return.
Command Type
Execute
Example
The first example illustrates termination current reminder success case.
AT+MALMH
OK
The second example illustrates termination current reminder error case, because reminder does not exist.
The AT+CMEE=2 command enables verbose error report.
AT+CMEE=2
December 31, 2007
Table 3-45: +MALARM Parameters
<Parameter>
Syntax
Response/Action
+MALMH
OK
or:
+CME ERROR:
<error_code>
AT Commands Reference Manual
Chapter 3: AT Commands Reference
Description
A time length of the reminder in minutes' values.
Number in 0-997920 range.
A schedule multiple recurring instances.
0 - None.
1 - Daily.
2 - Weekly.
3 - Monthly on day (for example: 2nd Wednesday each
month).
4 - Monthly on date (for example: every 15th of the
month). If on days that do not occur each mount such as
the 29th, 30th, or 31st, the reminder is activated on the
last week day of the month.
5 - Yearly.
Remarks
3-87