Command
Type
Read
December 31, 2007
Syntax
+CGEQREQ?
+CGEQREQ: <cid>, <Traffic
class> ,<Maximum bitrate UL>
,<Maximum bitrate DL>
,<Guaranteed bitrate UL>
,<Guaranteed bitrate DL>
,<Delivery order> ,<Maximum
SDU size> ,<SDU error ratio>
,<Residual bit error ratio>
,<Delivery of erroneous SDUs>
,<Transfer delay> ,<Traffic
handling priority>
[<CR><LF>+CGEQREQ: <cid>,
<Traffic class> ,<Maximum bitrate
UL> ,<Maximum bitrate DL>
,<Guaranteed bitrate UL>
,<Guaranteed bitrate DL>
,<Delivery order> ,<Maximum
SDU size> ,<SDU error ratio>
,<Residual bit error ratio>
,<Delivery of erroneous SDUs>
,<Transfer delay> ,<Traffic
handling priority>
[...]]
AT Commands Reference Manual
Chapter 3: AT Commands Reference
Response/Action
Remarks
The read command
returns the current settings
for each defined context.
3-341