HP LC2000r - NetServer - 128 MB RAM Installation Manual page 99

Chapter 8 Installing the HP NetServer in an HP Rack System/E or Rack System/U
7. Rest the HP NetServer handles on the slides and then line up the mounting
holes in the HP NetServer chassis with the screw holes in the slides (see
Figure 8-11).
Figure 8-11. Securing the HP NetServer to the Slides
8. Insert three screws through each slide member into the HP NetServer.
Tighten all screws securely.
9. Remove the two screws from each handle and remove the handles (see
Figure 8-12).
NOTE Save the handles and screws for future removal and reshipping
of the NetServer.
91