HP LC2000r - NetServer - 128 MB RAM Installation Manual page 17

Chapter 1
a. Create Drivers Diskette(s): On the Create Drivers Diskette(s)
screen, select Create Drivers Diskette(s) to create one or more
customized diskettes containing HP drivers and configuration files
to use when you install the NOS.
b. Print and Read Instructions: On the Show NOS Installation
Instructions screen, select "Save to Disk" to copy the NOS
installation instructions to disk. Then print them from disk. Read
the instructions and follow them to install the NOS.
Install NOS:
Automated NOS Installation: For certain versions of Novell
NetWare or Microsoft Windows NT Server, Configuration
Assistant formats and partitions the hard disk drive. Installation
Assistant then guides you through the NOS installation and
configures the NOS with the appropriate drivers for the HP-bundled
configuration or for network interface cards on HP's Tested
Configurations.
or
Manual NOS Installation: Follow the instructions on the screen and
the network operating system installation instructions that you
printed.
If HP NetRAID mode has been selected, you may need to install
NetRAID drivers and the NOS specific configuration utility. Refer
to Chapter 6, "HP NetRAID Software" of the Integrated HP
NetRAID Controller Configuration Guide.
15. Install HP TopTools: Refer to the HP NetServer Server Management
Reference Guide and install HP TopTools.
If you plan to manage HP NetRAID mode over the network, refer to
Chapter 8, "Managing Servers over the Network," of the Integrated HP
NetRAID Controller Configuration Guide.
16. Refer to Information Assistant on the HP NetServer Online Documentation
CD-ROM, for further information about your HP NetServer. See Chapter
11, "Information Assistant," for information.
17. Test and troubleshoot as necessary.
Refer to Chapter 12, "Troubleshooting."
Your LH 6000r or LH 6000 installation is complete.
Setting Up the HP NetServer LH 6000/6000r
9