HP LC2000r - NetServer - 128 MB RAM Installation Manual page 66

Chapter 5
Figure 5-5. Align DIMM Notches with slot keys
NOTE
If the latches do not close, repeat until they do.
Repeat step 10 to install all of the DIMMs for your memory configuration.
11. Carefully reinsert the system board assembly into its guides, and reseat it
into its slot by rotating the blue latches to the flat, locked position.
12. Replace the two screws securing the system board assembly to the chassis.
13. Follow the procedure in Chapter 3, "Opening and Closing the HP
NetServer," for closing up the server.
14. Reconnect power and cables.
15. Restore NetServer to normal operation.
This completes your DIMM installation.
58
Installing Additional Memory