Table of Contents
Advertisement
@ Take off the hatch,
pushing this part
toward <.
@ Slide off the cover
from the indentations.
@ Pull up the cover,
pinching the tabs.
® Remove the guide
cover by lifting it up
along the roller.
© Remove the paper if it
is stick around the
roller,
@ Insert the guide cover
along the roller.
v
Reinsert the cover
firmly into the
indentations.
@ Pinch the tabs so that
the cover clicks into
place.
@ Fit the hatch into the
~
@ Reinsert the hatch so
that it clicks into
place.
Take off the bottom
hatch for checking
a paper jam and
check whether a
sheet is stuck
inside the printer. If
you find a jammed
sheet, pull it out.
Stand the unit on its
right side as
illustrated.
@ Take off the hatch,
possi up on the
ab.
Reinsert the colour
6
tibbon cassette and
turn on the power.
@lf you find a jammed
sheet, remove it.
roller:
v
@ Fit into
the slit.
@ Reinsert the hatch so
that it clicks into
place.
Advertisement
Table of Contents
