Table of Contents
Advertisement
Confirm and error beep
sounds
When you press a button
on the main unit or
remote commander, a
beep sounds to show that
you have done an
expected step of the
operation. If you have
done an unacceptable
step, repeated beeps
sound to show that the
printer rejected your
operation.
To change the image
stored in memory
Press the NO button or
the SOURCE/MEMORY
button to return to the
playback pictures. Press
the CAPTURE button
again to store a new
image. The previous
image in memory is
replaced with the new
qne.
Press the PRINT
button.
The playback picture
reappears on the screen.
Wait about 70 seconds
for a printout to emerge.
Dots on the PRINT
STATUS lamp flash one
after another, from left
(START) to right (END),
as printing process
proceeds.
When the printout
emerges from the paper
outlet, take it out.
When the printing is over
vy
Printing is completed.
Note
To prevent paper jamming,
do not leave more than 30
printouts on the paper
outlet.
When the printer
does not
print
¢ If you turn off the
printer, the stored image
is erased. Store the
image again to print it.
As long as the ERROR
or PAPER JAM lamp
lights or an error
message appears on
the screen, the printer
will not print. To correct
the error, see "Error
messages" on page 66
or "If Paper Jams" on
page 68.
Notes
¢ To avoid malfunction,
do not unplug the
power cord from the
wall outlet during
printing or operation.
If you should turn off
the printer during
printing, the printer will
be turned off
automatically after the
printing in process is
complete.
Do not open the
hatches for checking a
paper jam on the upper
and bottom panels of
the printer during
printing.
A black line may
appear on the right or
left end of a printout
although no such a line
appears on the screen.
This is due to a
distortion in the video
signals and not due to
some trouble with the
printer.
Notes on preserving your
printouts
© To avoid degradation of
the colour, do not place
a printout in locations
subject to:
— high temperatures
— high humidity
— direct sunlight.
Also avoid contact with
any liquid, especially
alcohol or solvents.
Do not stick cellophane
tape or leave plastic
erasers on a printout.
Also avoid putting a
printout under a plastic
desk mat. The colour
may stick to the plastic
surface.
When storing in an
album, use a pocket-
type transparent album.
If a printout is stored in
an album containing
chemical material or
glue, dye from the
printout may transfer to
the album paper.
Advertisement
Table of Contents
