Table of Contents
Advertisement
CAPTURE
MODE
is set
to.
Please open upper hatch
and remove jammed paper.
The CAPTURE mode is
automatically switched
from the FIELD mode to
the FRAME mode.
(in the SPLIT NORM or
STROBE mode)
Please confirm memory.
An image is not stored
correctly or not stored at
all in the memory.
Check that:
¢ An image is stored in
the memory. If not, press
CAPTURE to store it.
The stored image is
displayed on the screen
before you press the
PRINT button.
¢ The FRAME mode is
used in printing 1/4- or
1/16 size different,
strobe, or inset images.
¢ FIELD A or Bis
selected when you print
the image stored in
FIELD mode.
Paper is jammed.
Turn off the power and
open the upper hatch to
remove the jammed
paper. (page 68)
Please make sure
picture is captured
correctly.
An image is not stored
correctly or not stored at
all in the memory.
Check that:
e An image is stored in
the momory. If not,
press CAPTURE to
Store it.
¢ The FRAME mode is
selected in printing the
image stored in the
FIELD mode.
Select the FIELD mode.
Please open lower hatch
and remove jammed paper.
Paper is jammed.
Turn off the power and
open the bottom hatch to
remove the jammed
Paper. (page 69)
Motor is stopped.
Please turn power off.
Motor does not work
because of paper jam or
other problem.
Turn off the power then
open the upper or bottom
hatch to check if paper is
jammed. If so, remove the
jammed paper. If the
printer still does not work,
contact Sony service
facilities for assistance.
Advertisement
Table of Contents
