Table of Contents
Advertisement
STROBE input screen
Flashing. (When
selecting 4-SPLIT
STROBE mode)
About the CAPTURE
MODE available
In 4-SPLIT or 16-SPLIT
STROBE mode, set
CAPTURE MODE to
FRAME. If you select
FIELD A or B mode, an
error message stating
"CAPTURE MODE is set
to @ ." appears and
CAPTURE MODE is
automatically switched to
FRAME mode. (You can
print a fast-moving
subject without blur.)
When the image
you want to print
appears, press the
CAPTURE button to
start storing a
series of strobe
images.
Sequential views of a
moving object are
automatically stored with
the selected strobe action
speed in step 3.
Capturing images...
The position where
an image is stored
lights in yellow.
The position where
an image is being
stored flashes in
the order of
17> 2>3 4,
When all the images are
stored, they are displayed
as they will be printed.
To change the image
stored in the memory
Press the NO button and
then the CAPTURE button
to start storing strobe
images.
Press the PRINT
button.
When the printing is over,
Vv
Printing is completed.
To select a different
sub-menu
Press the MENU button
and select the desired
item (sub-menu) on the
main MENU screen with
the
buttons.
Note
When you combine
4-SPLIT NORM or
STROBE mode with
16-SPLIT MULTI mode (or,
16-SPLIT NORM or
STROBE mode with
4-SPLIT MULTI mode),
you can make a printout
of 64 images. Such a
printout, however, cannot
be recommended since its
picture quality becomes
poor.
AS
Advertisement
Table of Contents
