Table of Contents
Advertisement
Press the PRINT
Notes
you have entered
button.
¢ The entered title will be
all the characters
lost when you turn off
for your title and
the power.
then select "END"
We suggest you set the
with the (4] [¥) []
CAPTURE MODE to
[>] buttons.
FRAME to print the
title distinctly.
If you select FIELD A
or B, the title may be
coarse when printed.
Repeat step 3 until
The CONFIRM screen
appears with the entered
You can enter up to 40
characters as a title.
To print the image
without the entered title
Press the CAPTION
button so that the entered
title is not displayed.
TITLE (1
ABCDEFGHNKLM
Bs.
NOPQRSTUVWXYZ
abcdetghijkim
700 $i-+ e
Waparsiuswnyé a 8ti-
(Happy birthday! 74% 2
Enter: WME) + fea BS:
223 Finish:exo
Lights in yellow.
To erase the characters
entered in the input line
Press the NO button. The
character to the left of
the cursor (highlighted in
yellow) will be deleted.
To replace the character
with the new one
Press the POSITION </>
buttons on the remote
commander to move the
the cursor (highlighted in
yellow) to the character
you want to replace. Then
select a new character
with the (<] 6) (A) [¥) buttons
and press the YES
button: the new character
replaces the previous one.
When the entered title is
displayed, the stored
image is printed with the
title. If it is not displayed,
press the CAPTION
button to make it appear.
If the playback picture is
being displayed, press the
SOURCE/MEMORY button
to display the stored
image on the screen. Or,
if you have not stored an
image yet, press the
CAPTURE button.
Entered
disappears.
Advertisement
Table of Contents
