Table of Contents
Advertisement
The following are the steps
to make a full-size, basic
printout of the pictures
played back on the video
equipment. For printing
from the TV, refer to
"Printing TV Broadcast
Pictures" on page 38.
Before you begin
e Check that the printer is
properly connected to
the video equipment and
television.
Check that the correct
combination of colour
ribbon cassette and
print paper are properly
loaded.
You can use the remote
commander to do this.
34
Tum on the power
of the printer and
the video equipment.
(Set the TV/VTR
switch on the TV to
"VTR")
The green tamp tights when
you press the switch to
turn on the printer.
To turn it off,
press the,
switch again.
The red tamp
lights.
ON/STANDBY
In about 4 seconds after
you turn on the power,
the printer becomes ready
for printing and the
following message
appears.
Indicates the next
operation.
Note
Before the printer
becomes ready, you
cannot turn off the power
even if you press the
POWER switch.
2
Play back the
pictures on the
video equipment.
When the image
3
you want to print
appears on the
screen, press the
CAPTURE button to
store it.
The image stored in
memory appears on the
screen so that you can
confirm the image for
printing.
MEMORY lamp lights.
Present print
quantity
Present memory
mode (FRAME)
Next operation options
Indicates the displayed
picture is the stored
image.
Advertisement
Table of Contents
