Table of Contents
Advertisement
To check the image
stored in the memory
@ Set the TV/VTR switch
on the TV to "VTR".
@ Make sure that the
MEMORY lamp lights.
\f it does not, press
the SOURCE/MEMORY
button.
The stored image is
displayed with the
"CONFIRM" message.
To change the image
stored in memory
@ Set the TV/VTR switch
on the TV to "TV."
@ Make sure that the
MEMORY lamp goes
off. If it does not,
press the SOURCE/
MEMORY button.
The broadcast pictures
are displayed.
@ If you have just
pressed the CAPTURE
button, press the NO
button.
@ When the image you
want to print appears,
press the CAPTURE
button to store it.
The MEMORY lamp
lights.
Press the PRINT
4
button.
Wait about 70 seconds
for the printout to emerge.
Notes
e When you want to
make a variety of
printouts using the
MENU screen, set the
TVIVTR switch on the
TV to "VTR." Display
the MENU screen and
make the necessary
settings. Then set the
switch to "TV" and
store and print an
image.
When you turn off the
printer, the image
stored in memory is
erased. When you
printing from the video
equipment, you can
store the same image
again. When printing
from the TV, however,
you cannot store the
same broadcast picture
again.
When the MEMORY
lamp lights, you can
print the stored image
but cannot store
another image. if you
press the CAPTURE
button, error beeps
sound.
When the MEMORY
lamp goes off, you can
store an image but
cannot print the image.
if you press the PRINT
button, error beeps
sound.
Advertisement
Table of Contents
