Tips For Efficient Use Of Telephone - Nokia 7710 User Manual

send the DTMF tone automatically, or
to use the Dialler view. The Dialler view opens
automatically if there is no DTMF string for the call in
Contacts.
To enter DTMF tones manually during a call, tap
call or press > View >
view. Enter the DTMF string.
Tip: There are 2 special characters that you can use by
double-tapping * on the keypad:
• p (pause) — Causes a three-second pause
between the digits in a DTMF tone string. All
digits that follow the pause are treated as
DTMF tones.
• w (wait) — Pauses the sending of DTMF digits
until you tap Send. The rest of the string is
sent to the network. All digits that follow the
wait are treated as DTMF tones.
You can add DTMF tones to the
card.

Tips for efficient use of Telephone

• The silent indicator is displayed in the status
indicator area when you have set the Silent profile to
active. Tapping this indicator will open a dialog where
you can change the profile. The indicator is removed
from the status indicator area when you activate a
profile other than 'Silent'.
Enter manually
New
Dialler to open the Dialler
DTMF field in a contact
• In the call handling view, press
put the current call on hold or to activate a held call.
When you are not on a call, press
last dialled calls list.
• In the speed dial view, you can drag the assigned
speed dial buttons with the stylus to reorganise them.
The fixed voice mail button cannot be moved.
during a call to
to bring up the
42