Table of Contents
Advertisement
time:. This is a network service. Note that this may
cause some alarms to expire, if the alarm has been set
between the old and the updated time.
To use daylight saving time, select
saving:.
Display
Go to
Desk
>
Control panel
Fig. 32: Display
To change the brightness of the display, tap <+> or
<->.
To define how soon the display brightness will go
down to save power if the screen is left untouched,
select the appropriate brightness period.
Tip: Selecting a low brightness level and a short time
period saves the battery and increases the operation
time of the device.
Apply daylight-
> Display.
To define how soon a screen saver starts if the
screen is left untouched, select the appropriate time
limit for the
Screen saver time-out:
you cannot change the look of the screen saver.
To set an automatic touch screen and keypad lock
on, select the
Screen saver locks display & keys:
box. The touch screen and keypad are locked
automatically when the screen saver is activated. For
more information, see "Touch screen and keypad lock"
on page 25.
Enhancements
Go to
Desk
>
Control panel
Here you can define some of the settings of the headset
and loopset used with the device.
To modify the enhancement properties, tap
define the following:
Default profile:
— Choose the profile that will be activated,
when you attach a headset or loopset to your device.
Automatic answer:
— Define whether you want the device
to answer an incoming call automatically after five
seconds time when a headset or loopset is attached to
the device.
Internet setup
Go to
Desk
>
Control panel
option. Note that
check
> Enhancements.
Edit
and
>
Internet
setup.
106
Advertisement
Table of Contents
