Table of Contents
Advertisement
Position request rule:
— Define the global privacy setting.
Select
Use individual request rules
you define for each contact and service on the
page. Select
Confirm first
to be prompted for the
acceptance of all location requests regardless of the
setting on the
Individual
page.
Always reject
to accept or reject location requests
regardless of the settings on the Individual page.
Valid until:
— Define the time limit for the acceptance or
rejection, if defined. When the time limit has been reached,
the privacy level switches to
Notify when position sent:
— Define the global notification
setting. This option is only available, if you have set the
verification policy to
Always
Individual page
On the
Individual
page, you can define the privacy settings
for a specific contact or service.
The page consists of a list of contacts and services that
have specific privacy settings. When a contact or service
has requested a location, it may be added to the privacy
list. You can only add contacts to the list within this dialog.
To add a contact, tap Add, tap a contact in the list and
tap Close. Define the individual privacy settings. The
options are similar to ones defined on the Global page. Tap
Close
to proceed.
to use the settings that
Individual
SelectAlways
acceptor
Use individual request
rules.
accept.
To edit a contact, tap Edit, and modify the individual
privacy settings. The options are similar to ones defined
on the Global page. Tap
Close
For more information on selecting contacts, see "Viewing
and searching for contacts" on page 60.
RealPlayer settings
Go to
Desk
>
Control panel
Define the following:
Network
Data
speed::— Select the connection speed. Note that the
options
Very fast
and
Slow
may affect the video quality.
Connection time-out:
— Select the time period in seconds
after which the connection closes, if the connection is not
successful.
Server time-out:
— If the server is not able to send enough
data and a lot of buffering takes place, you may need to
define a server time-out.
Port range:
— The range of port numbers used for the
connection. The default values are the same as those for
Internet settings.
Default access point:
— The connection that you want to
use as a default connection. The default value is the same
as that for Internet settings.
to proceed.
>
RealPlayer
settings.
112
Advertisement
Table of Contents
