Sending Dtmf Tones - Nokia 7710 User Manual

selects the most appropriate network. In manual network
selection, the device searches for available networks and
presents you with a list of networks found. You can then
select which network to use. Note that the possibility to
change a network depends on your network operator.
Cell info display: - Select
used within a Micro Cellular Network. An indicator of the
MCN cell is shown in the phone number field. The
indicator is not shown during a call.
Security page
When security features that restrict calls are in use (such
as call barring, closed user group, and fixed dialing) calls
still may be possible to the official emergency number
programmed into your device.
Closed user group: —Specify a group of people to whom you
can call and who can call you. Select
the group agreed on with the network operator. Select
to activate this network service. You must enter the group
number that you have obtained from the network.
Fixed dialling: — If your SIM card supports this service, you
can restrict your calls to a limited set of numbers stored
in the SIM card. When the fixed dialling service is active,
the SIM phone book list shows only numbers in the fixed
dialling list. You still have access to the Contacts
directory, but you cannot call those numbers.
41
On to indicate that the device is
Default to activate
If you want to change the settings or view the fixed
numbers, you are required to enter your PIN2 code. Select
Contacts to add, modify, or delete numbers.
You are required to enter names and numbers into the
fixed dialling list.
Note: Fixed dialling also affects service requests (also
known as SS and USSD commands), such as activation
commands for network services.

Sending DTMF tones

DTMF (Dual Tone Multi-Frequency) tones are the tones
you hear when you tap the number keys on the numeric
keypad of the Telephone application. For example, DTMF
tones allow you to communicate with voice mailboxes and
computerised telephony systems.
You can send DTMF tones to the network to, for example,
access automated phone services, voice mailboxes, or
banking systems.
On
You can send DTMF tones automatically if you have added
a DTMF tone to the DTMF
Contacts application. You can also send DTMF tones
manually in the Dialler view of Telephone. The manual
method of transmitting DTMF tones is recommended
when the DTMF tone string is short.
To send DTMF tone strings automatically during a
call, press , and select
there is a DTMF string for the currently active call in
Contacts, the Send DTMF
field in a contact card in
Options > Send DTMF.... If
dialog opens. Tap Send to