Table of Contents
Advertisement
Clock
Go to
Desk
> Clock.
To set the current date and time, tap
Select the
Auto-update of date & time:
want the network to update the date and time
automatically to your device. Note that this is a
network service. Otherwise, tap
arrows to change the time. Tap
To use daylight saving time, select the
saving:
check box.
See also "Regional settings" on page 113.
To change between an analogue and digital clock
type, tap the face of the clock.
To display only the home city in the Time view, press
and select Display. Clear the option
city.
To switch between the Time and Alarm view, press
and select
98
Date and
check box if you
and tap the
to set the date.
Apply daylight-
Destination
View
>
Alarm
or Time.
time.
Fig. 28: Clock
Alarms
To set an alarm, tap
displayed when the alarm goes off. Tap
and
to set the alarm time. Tap OK. Define how
often the alarm repeats, and tap OK.
If the alarm time is reached while the device is switched
off, the device switches itself on and starts sounding the
alarm tone.
To turn off and remove a sounding alarm, tap Stop.
If the device was switched off when the alarm sounded,
it asks whether you want to activate the device. Press
Cancel
to switch off the device or
Set
alarm. Write the text that is
, then tap
Switch on
to switch
Advertisement
Table of Contents
