Table of Contents
Advertisement
62 Maintenance
Maintenance of painted surfaces
WARNING!
Obey the
Safety instructions (page 9)
physical injury or death, or damage to the equipment may occur.
WARNING!
Obey the
Safety instructions (page
primer and paint manufacture.
￭
Repainting the scratched areas
Tools and materials
Use the following tools and materials. If the listed tools are not available in your local market,
you can use products with similar characteristics approved by a qualified technician, and
get approval from ABB.
Tool
Flap Disc
Grinding machine
Flexible abrasive sponges
Degreasing sprays
Body shop putties
Rags or blower
Disposable gloves
Safety glasses
Masks
Brushes
Epoxy primer
Aliphatic polyurethane
Painting the damaged surface (no visible rust)
If there is damage(s) to the paint surface, but no damages to the metal surface (i.e. no
visible rust), then follow these instructions:
1. Clean the damaged area first with a suitable detergent and clean water.
2. Let the surface dry completely and keep it clean.
3. Apply the first layer of paint to the damaged area. Let it dry thoroughly for at least 12
hours.
4. Apply the second layer of paint to the damaged area.
Painting the damaged surface (visible rust)
If the damage extends to the metal surface or there is visible rust:
1. Remove the rust with sandpaper/polishing disk.
and the local safety regulations. If ignored,
9), requirements and specifications of the
Specification
1 ud
1 ud
10 ud
250 ml
1 ud
200 gr
10 ud
1 ud
2 ud
2 ud
500 gr
500 gr
Make
Silver P80 Triton
Bosch
Ehs
-
Finissage, Impa
-
-
Uvex Astrospec
-
-
Maper
Maper
Advertisement
Table of Contents
