ABB PVS-120 Hardware Manual page 25

Code Name
+MCB Main circuit breaker
+C5M C5-M corrosion pro-
tection degree for
enclosure
+SIGC Signal concentration
+COM1 Basic communica-
tion board 1
+COM2 Basic communica-
tion board 2
+UPS3 UPS power value
3kVA
+UPS6 UPS power value
6kVA
+UPS10 UPS power value
10kVA
+COLOR Non IEC cable colors
+JP HR test Japan MV trans-
former heat run test
+JP SC calc Japan MV
transformer short cir-
cuit
calculation
Description
Addition of a main circuit breaker
Station
Enclosure and MV transformer standard C4 corrosion protection degree
is upgraded to
C5M corrosion protection degree. Also, select the upgrade of
C5 protection for the dry transformer (+ TRC5).
This optional is recommended
for sites near sea (>10 km)
Concentration of all the signals of the station in one point
Communication board for projects of 1 station
Communication board for projects of >1 station, for communication
between stations
UPS with capacity of 3kVA (6min) / 2kVA (8min) /1kVA (20min) /0,5kVA
(48min) /0,3kVA (95min). Installation included
UPS with capacity of 6kVA (10min) / 4kVA (17min) /3kVA (23min) /2kVA
(42min) /1kVA (84min). Installation included
UPS with capacity of 10kVA (6min) / 8kVA (8min). Installation included
IEC standard cable colors are replaced with cables with customized
colors
Tests
JP transformer heat run test (one per transformer)
JP Transformer short circuit calculation (one per transformer)
Hardware description 25