Mechanical installation
Contents of this chapter
This chapter describes the mechanical installation of the PVS-100/120 medium voltage
station (MVS) and gives instructions on how to select the location and guidelines to build
the foundation for the MVS. Always obey the local regulations.
Safety
See
Safety instructions (page
Before you move the MVS, see instructions in chapter
transporting (page
27).
Tools
Use the following tools to move the MVS, to fasten the MVS foundation, and to tighten the
connections:
•
Crane, forklift, or pallet truck (with sufficient load capacity)
•
Pozidriv and Torx (2.5 to 6 mm) screwdrivers with short and long heads or bits
•
Torque wrench
•
Set of wrenches and sockets.
Foundation guidelines
For information on the MVS dimensions and footprint, see drawing
3AES-PVS-100_120-MVS-30-DW02.
Always follow the local rules and laws when designing and constructing the foundation. Pay
attention to the proper planning and constructing of the foundation. For example, an improper
foundation can cause settling of the MVS or difficulty opening the door.
9).
Mechanical installation 33
4
Storing, lifting and