Toro Greensmaster eFlex 1021 Operator's Manual page 22

Kickstand (continued)
The machine is heavy and can cause back strain if lifted improperly.
Put your foot pressure down on the kickstand and use only the lift-assist handle to
raise the machine. Attempting to raise the machine onto the kickstand any other way
can cause injury.
• T
RANSPORT
To use the kickstand to install the transport wheels, put your foot on the kickstand while
pulling up and back on the lift-assist handle
• S
TORAGE
1. Keep your foot on the kickstand while lowering the traction drum to the ground.
2. Remove your foot from the kickstand and allow space for the kickstand to retract to
the S
• C
UTTING
To prevent the machine from tipping backward when removing the cutting unit, lower the
kickstand and push out the spring pin
Product Overview: Controls
-W -S position
HEEL ERVICE
position :
position.
TORAGE
-U -S position
NIT ERVICE
G407049
CAUTION
:
.
:
so that it keeps the kickstand in position.
Page 4–9 3460-892 A