Outdoor Unit Status - Mitsubishi Electric AE-200A/AE-50A Instruction Book

9-3. Outdoor unit status

On the Outdoor Unit Status screen, operators can check the capacity value, high pressure, and low pressure of
each outdoor unit.
Click [Maintenance] in the menu bar, and then click [Outdoor unit status] to access the Outdoor Unit Status
screen.
Note: The outdoor unit status may not appear if the AE-200/AE-50 was started up while the outdoor unit was powered off. If this
is the case, restart the AE-200/AE-50.
Update
Click to show the most
recent data.
Outdoor unit icon
M-NET address of the
outdoor unit
Item
Update
Capacity Value
High Pressure
Low Pressure
Outdoor unit icon
* When a communication error occurs, "--" will appear in the Capacity Value, High Pressure, and Low Pressure value fields.
* If the outdoor unit is a PUMY model of City Multi S-series, "--" will appear in the Capacity Value, High Pressure, and Low Pressure value
fields.
WT07139X01
Click to show the most recent data.
When [Auto] is selected, the data is updated automatically every minute.
The capacity value of the compressor on a given outdoor unit will appear.
Note: The capacity value of a sub outdoor unit will not appear.
Refrigerant discharge pressure of the compressor on a given outdoor unit will appear.
Refrigerant suction pressure of the compressor on a given outdoor unit will appear.
: Normal
: Communication error or unit error
56
Description
High Pressure
Low Pressure
Capacity Value