Mitsubishi Electric AE-200A/AE-50A Instruction Book page 61

Item
Power consumption
data
WT07139X01
Click to download a CSV file of the power consumption data.
■ File name
"ChargeParameter"_[yyyy]-[mm]-[dd]"MCPA"[MCP address]-[Time period (1–5)].csv
Note: The date will appear in the format that has been set on the Basic System settings
screen, accessible via the Web Browser for Initial Settings.
Note: Time periods 1 through 5 can only be set from TG-2000A. When shipped from the
factory, only Time period 1 is settable.
■ File output destination
[Save destination]\[Serial No.]\"OperationalData"\"ChargeParameters"\[Date]
Note: The date will appear in the format that has been set on the Basic System settings
screen, accessible via the Web Browser for Initial Settings.
■ File format
Row Item
1st File Type
2nd Data range *1
MCP (PI controller)
3rd
address
4th Item
5th–
Data *2*3*4*5*6
66th
*1 The date will appear in the format that has been set on the Basic System settings screen, accessible
via the Web Browser for Initial Settings.
*2 The separator character and decimal point character selected on the Measurement screen
(accessible via the Web Browser for Initial Settings) will be used to the data.
*3 Each value is the cumulative value between the start date and the end date.
*4 Each value is between 0.00 and 999999.99. If the value exceeds the maximum value, it will wrap
around to zero.
*5 The value will not appear if the data does not exist.
*6 Each file contains the data of up to 62 days.
■ File sample
202
12/19/2013-1/10/2014
MCP 50-1
No.,Date,Count value(Ch1),Count value(Ch2),Count value(Ch3),Count value(Ch4)
501,12/19/2013,190887.43,872411.43,227424.88,55515.50
501,12/20/2013,190899.16,872420.12,227428.63,55526.70
501,12/21/2013,190905.22,872442.23,227435.74,55537.90
501,12/22/2013,190910.38,878449.77,227448.19,55549.84
:
501,01/10/2014,200014.38,87950.36,227925.19,60111.63
Description
Format
202
Start date + "–" + End date
"MCP" + M-NET address + "–" + Time period (1–5)
"No.,Date,Count value(Ch1),Count value(Ch2),Count
value(Ch3),Count value(Ch4)"
MCP address + Time period, Date
MCP 4
61
, MCP 1, MCP 2, MCP 3,
*1