Mitsubishi Electric AE-200A/AE-50A Instruction Book page 10

Encrypting the communication data and logging in to the Web browser
(HTTPS connection)
AE-200/AE-50 can encrypt communication data using HTTPS (SSL).
When connecting the AE-200/AE-50 to the LAN that is accessible to the general public, it is recommended that
the following settings be made so that the units are monitored and controlled on the encrypted web page.
Note: Depending on the operating system or the Java version, HTTPS encrypted communication may not be enabled properly.
If this happens, use an HTTP connection as explained in the previous page.
(1) Prefix the web address with [https], enter the rest of the address, and
press the [Enter] key.
https://[IP Address of each AE-200/AE-50]/administrator.html
Note: If the IP address of the AE-200/AE-50 is [192.168.1.1], the web page
address is [https://192.168.1.1/administrator.html].
The encrypted data communication will begin, and the Login screen
will appear.
If a security certificate error page appears instead of the Login screen,
go to step (2) below.
(2) If the security certificate is invalid, a security certificate error page (as
shown at right) will appear.
Click [Continue to this website (not recommended)].
(3) If the connection is successfully made, the Login screen will appear.
Note: Although the address bar will turn red and a message "Certificate error"
will appear, you can still access the Web browser.
WT07139X01
10