(1-3) Selecting a block as a target
Select [Block] in the Setting Range section.
Select a block name, or select one of the group numbers in the block
to display the block name automatically. (If the selected group does not
belong to a block, the block name will not be displayed automatically.)
If different equipment types exist together in the same block, a screen to
select an equipment type will appear.
Click one of the equipment types to set the schedule.
A Schedule Settings screen will appear.
To create a schedule for the given block from scratch, click the radio button
next to [New settings] and click [OK].
To create a schedule based on the existing setting of another group, click
the radio button next to [Based on the following group settings], select the
name of the group whose schedule is to be based on, and click [OK]. The
contents of the schedule that have been set for the selected group will
appear in the Contents of Schedule section.
WT07139X01
42